Photo gallery · 142 photos

IROCUBE in real production

Taken in customer plants and in our assembly hall: cells, robots at the machine, parts and grippers, operators and our software. Filter by product or topic, then select a photo to enlarge it.

IROCUBE M10L robotic cell — M10L · CellsIROCUBE M10L robotic cell

IROCUBE Mobile building a pallet — Mobile · CellsIROCUBE Mobile building a pallet

IROCUBE Mobile on the shop floor — Mobile · CellsIROCUBE Mobile on the shop floor

The crated cell goes onto the truck by forklift

IROCUBE M7 robotic cell, standalone — M7 · CellsIROCUBE M7 robotic cell, standalone

IROCUBE M7 with its yellow operator door and loading conveyor — M7 · CellsIROCUBE M7 with its yellow operator door and loading conveyor

IROCUBE M7 with two conveyor drawers — M7 · CellsIROCUBE M7 with two conveyor drawers

A line of IROCUBE M7 cells at FANUC Robodrills — M7 · CellsA line of IROCUBE M7 cells at FANUC Robodrills

IROCUBE M7 cells, each loading its own Robodrill — M7 · CellsIROCUBE M7 cells, each loading its own Robodrill

Setting up the robot inside an IROCUBE M7 — M7 · CellsSetting up the robot inside an IROCUBE M7

The robot loads a brass part into the Robodrill vise — M7 · CellsThe robot loads a brass part into the Robodrill vise

Operator panel and robot behind the safety door — M7 · CellsOperator panel and robot behind the safety door

The operator fills the loading conveyor while the cell runs — M7 · CellsThe operator fills the loading conveyor while the cell runs

Inside the Robodrill: the double gripper at the vise — M7 · CellsInside the Robodrill: the double gripper at the vise

Loading raw parts into an IROCUBE M7 — M7 · Robot at workLoading raw parts into an IROCUBE M7

IROCUBE M7 cells and crates of raw brass parts — M7 · Robot at workIROCUBE M7 cells and crates of raw brass parts

A long row of IROCUBE cells — M7 · Robot at workA long row of IROCUBE cells

The Robodrill hall, every machine with its own cell — M7 · Robot at workThe Robodrill hall, every machine with its own cell

IROCUBE M7 line with finished parts in crates — M7 · Robot at workIROCUBE M7 line with finished parts in crates

Raw parts placed on the backlit conveyor — M7 · Robot at workRaw parts placed on the backlit conveyor

Robot at the Robodrill vise — M7 · Robot at workRobot at the Robodrill vise

Double gripper with a raw part — M7 · Robot at workDouble gripper with a raw part

Loading the next part — M7 · Robot at workLoading the next part

The robot reaching into the Robodrill — M7 · Robot at workThe robot reaching into the Robodrill

Picking parts from the backlit conveyor — M7 · Robot at workPicking parts from the backlit conveyor

Gripper at the machine fixture — M7 · Robot at workGripper at the machine fixture

Cell front with drawer conveyor and operator panel — M7 · Robot at workCell front with drawer conveyor and operator panel

Loading the drawer conveyor — M7 · Robot at workLoading the drawer conveyor

IROCUBE cells along a Robodrill line — M7 · Robot at workIROCUBE cells along a Robodrill line

The aisle between automated Robodrills — M7 · Robot at workThe aisle between automated Robodrills

Brass parts in the Robodrill fixture — M7 · Robot at workBrass parts in the Robodrill fixture

IROCUBE M10L on the shop floor — M10L · CellsIROCUBE M10L on the shop floor

The LR-10iA/10 loads an aluminum housing into the Robodrill — M10L · CellsThe LR-10iA/10 loads an aluminum housing into the Robodrill

Inside the M10L: robot, drawer conveyor and positioner — M10L · CellsInside the M10L: robot, drawer conveyor and positioner

M10L layout: the robot between conveyors and machine — M10L · CellsM10L layout: the robot between conveyors and machine

Picking a part from the loading conveyor — M10L · CellsPicking a part from the loading conveyor

Double gripper over the finished housings — M10L · CellsDouble gripper over the finished housings

Robot over the backlit conveyor — M10L · CellsRobot over the backlit conveyor

Aluminum housings lined up on the conveyor — M10L · CellsAluminum housings lined up on the conveyor

Loading parts into the IROCUBE M10L — M10L · CellsLoading parts into the IROCUBE M10L

Finished housings on the unloading conveyor — M10L · Robot at workFinished housings on the unloading conveyor

The robot and the Robodrill — M10L · Robot at workThe robot and the Robodrill

Gripping the next housing — M10L · Robot at workGripping the next housing

Automatic gripper change inside the cell — M10L · Robot at workAutomatic gripper change inside the cell

Picking a housing, seen from above — M10L · Robot at workPicking a housing, seen from above

Washing station: parts are rinsed before unloading — M10L · Robot at workWashing station: parts are rinsed before unloading

IROCUBE M12L on a Chiron machining center — M12L · CellsIROCUBE M12L on a Chiron machining center

The robot between the station and the Chiron — M12L · CellsThe robot between the station and the Chiron

The robot inside the Chiron work area — M12L · CellsThe robot inside the Chiron work area

M12L on a Chiron machining center, seen from above — M12L · CellsM12L on a Chiron machining center, seen from above

Loading the Chiron — M12L · CellsLoading the Chiron

Re-gripping a part at the station — M12L · CellsRe-gripping a part at the station

Complex brass parts at the re-gripping station — M12L · CellsComplex brass parts at the re-gripping station

Finished parts and the robot gripper — M12L · CellsFinished parts and the robot gripper

Robot and Chiron machining center — M12L · CellsRobot and Chiron machining center

M-10iD/12 inside the cell — M12L · CellsM-10iD/12 inside the cell

Gripper with a brass valve body — M12L · CellsGripper with a brass valve body

T Series cell at a Doosan Puma lathe — T Series · CellsT Series cell at a Doosan Puma lathe

The robot loads the lathe chuck — T Series · CellsThe robot loads the lathe chuck

T Series cell at the lathe, wide angle — T Series · CellsT Series cell at the lathe, wide angle

A row of T Series cells at CNC lathes — T Series · CellsA row of T Series cells at CNC lathes

T Series cells running side by side — T Series · CellsT Series cells running side by side

T Series cell from above: conveyor, robot and lathe — T Series · CellsT Series cell from above: conveyor, robot and lathe

Raw parts on the conveyor, the robot at the lathe — T Series · CellsRaw parts on the conveyor, the robot at the lathe

A hall of lathes, each with its own cell — T Series · CellsA hall of lathes, each with its own cell

T Series cells along the lathe line — T Series · CellsT Series cells along the lathe line

Robot at the lathe, operator side — T Series · CellsRobot at the lathe, operator side

IROCUBE MS60L: the robot above the conveyor and the transfer machine — MS60L · CellsIROCUBE MS60L: the robot above the conveyor and the transfer machine

Stäubli TX2-60L picking a brass part — MS60L · CellsStäubli TX2-60L picking a brass part

IROCUBE MS60L at the transfer machine — MS60L · CellsIROCUBE MS60L at the transfer machine

The cell in the KAS Group plant — MS60L · CellsThe cell in the KAS Group plant

The operator fills the backlit conveyor — MS60L · CellsThe operator fills the backlit conveyor

Loading raw brass parts while the cell runs — MS60L · CellsLoading raw brass parts while the cell runs

MS60L next to the transfer machine — MS60L · CellsMS60L next to the transfer machine

Robot behind the guarding, above the machine — MS60L · CellsRobot behind the guarding, above the machine

Gripper at the transfer machine fixture — MS60L · Robot at workGripper at the transfer machine fixture

Picking a located part from the conveyor — MS60L · Robot at workPicking a located part from the conveyor

Robot and conveyor from above — MS60L · Robot at workRobot and conveyor from above

The part in front of the second camera, seen from above — MS60L · Robot at workThe part in front of the second camera, seen from above

Robot, conveyor and camera from above — MS60L · Robot at workRobot, conveyor and camera from above

IROCUBE MS60L at the transfer machine — MS60L · Robot at workIROCUBE MS60L at the transfer machine

IROCUBE

The operator places raw parts on the loading conveyor

The robot loads a part into the machine vise

Machined housings lined up on the conveyor, the robot unloading the next one

IROCUBE MS60L at a transfer machine

T Series cell at a CNC lathe, seen from above

T Series cell behind its guarding at the lathe

IROVISION locates the part on the backlit conveyor; the robot picks it

A second camera checks the part in the gripper

The robot loads the part into the transfer machine

IROCUBE MS60L at a transfer machine

IROCUBE Plus F10 with FANUC robot

Plus F10 placing parts in the drawer trays, seen from above

Plus F10 over its part drawers

IROVISION locating parts in about 83 ms — MS60L · SoftwareIROVISION locating parts in about 83 ms

System Manager and IROVISION on the cell screen — MS60L · SoftwareSystem Manager and IROVISION on the cell screen

IROVISION: draw the picking region and train the model — SoftwareIROVISION: draw the picking region and train the model

IROVISION: model ready to test — SoftwareIROVISION: model ready to test

Parts found in any orientation — SoftwareParts found in any orientation

Testing the model by hand — SoftwareTesting the model by hand

Matching a turned part — SoftwareMatching a turned part

Different sizes and weights — SoftwareDifferent sizes and weights

Matching a complex part — SoftwareMatching a complex part

Expert mode: edit the model contour — SoftwareExpert mode: edit the model contour

System Manager: cell status and production — SoftwareSystem Manager: cell status and production

System Manager on desktop, tablet and phone — SoftwareSystem Manager on desktop, tablet and phone

IROCUBE M7 with its yellow operator door and loading conveyor — M7 · CellsIROCUBE M7 with its yellow operator door and loading conveyor

IROCUBE M7 next to a FANUC Robodrill — M7IROCUBE M7 next to a FANUC Robodrill

IROCUBE M7, conveyor side — M7IROCUBE M7, conveyor side

IROCUBE M7, front view — M7IROCUBE M7, front view

IROCUBE M10L, front view with loading station and IROVISION screen — M10L · CellsIROCUBE M10L, front view with loading station and IROVISION screen

Long conveyors for long unattended runs — M10LLong conveyors for long unattended runs

Inside the M10L: robot, conveyors, positioner — M10LInside the M10L: robot, conveyors, positioner

Floor-mounted LR-10iA/10 inside the cell — M10LFloor-mounted LR-10iA/10 inside the cell

Robot at the machine door — M10LRobot at the machine door

Picking from the loading conveyor — M10LPicking from the loading conveyor

M10L and machining center — M10LM10L and machining center

IROCUBE Plus on one Euro-pallet footprint — PlusIROCUBE Plus on one Euro-pallet footprint

IROCUBE Plus, drawer side — PlusIROCUBE Plus, drawer side

IROCUBE Plus with cobot — PlusIROCUBE Plus with cobot

IROCUBE Plus at a machining center — PlusIROCUBE Plus at a machining center

IROCUBE Plus at a machining center, top view — PlusIROCUBE Plus at a machining center, top view

Plus loading the machine — PlusPlus loading the machine

Plus drawer and machine — PlusPlus drawer and machine

Moves with a pallet jack — PlusMoves with a pallet jack

Delivered on a pallet — PlusDelivered on a pallet

Automatic tool changer for grippers — OptionsAutomatic tool changer for grippers

Gripper storage stand — OptionsGripper storage stand

Conveyor options — OptionsConveyor options

Washing and drying station — OptionsWashing and drying station

IROVISION slider camera — CellsIROVISION slider camera

The whole cell in one export crate

IROCUBE M10L robotic cell, perspective view — M10L · CellsIROCUBE M10L robotic cell, perspective view

IROCUBE M10L robotic cell — M10L · CellsIROCUBE M10L robotic cell

IROCUBE M12L robotic cell — M12L · CellsIROCUBE M12L robotic cell

IROCUBE M12L, robot module with guarding — M12L · CellsIROCUBE M12L, robot module with guarding

One M12L robot tending two machining centers — M12L · CellsOne M12L robot tending two machining centers

IROCUBE T Series cell — T Series · CellsIROCUBE T Series cell

IROCUBE M Series cell

IROCUBE Plus C10 with collaborative robot

Moving pictures

Watch the cells run

Full cycles, changeovers and IROVISION screen recordings on our video page.

Open videos

Your part next

Send us your part and machine

We prepare a layout and a quote for your machine and parts.

Request a quote